GLAZE REFLECTION is a high solids metallised polymer sealer finish designed to give a brilliant gloss in a minimum number of coats. Suitable for use on all types of vinyl and linoleum flooring. GLAZE REFLECTION is a hard finish which can be buffed with both low and high speed machinery. With high speed buffing the wet look is obtained the gloss achieved with low speed buffing is excellent. A major feature of GLAZE REFLECTION is the hard wearing nature of the formulation even after significant wear and tear the finish responds to buffing and returns the floor to pristine condition.
RECOMMENDED USES.
1 Remove all previous coatings from floor using floor polish stripper GLAZE STRIP SUPER as per label instructions. CAUTION DO NOT ALLOW STRIPPER TO DRY OUT ON TREATED AREA.
2 Apply 2 coats of GLAZE REFLECTION with a mop first dampened with water. Allow to dry for up to 30 minutes.
3 Maintain the floor by damp mopping with JASOL CLEAN MOP or HOSPITAL GRADE DETERGENT diluted as per label directions.
4 GLAZE REFLECTION requires minimal maintenance but it can be repaired by high speed burnishing using JASOL SPRAY BUFFER.
CAUTION DURING COLD WEATHER ALLOW 2 to 3 DAYS BEFORE BUFFING.
SAFETY INFORMATION. Although GLAZE REFLECTION is considered a non hazardous product the following general First Aid procedure applies. If poisoning occurs contact a doctor or Poisons Information Centre. If in eye hold eyes open and flood with water for at least 15 minutes. If swallowed do not induce vomiting give water to drink.
PACKAGING.
5 Litre
20 Litre